The machine is equipped with a nonstop feeding device with speeds of up to 120 sheets per minute. There are 2 suction cups each for lifting paper and 2 other suction cups for moving paper. Height and angle of suction heads are easily adjustable.
The pile table can be easily adjusted in all directions by a double speed control system while micro adjustment control. A blowing system is provided to enhance paper separation. There is an electronic sensor to prevent double sheet feeding. The machine is equipped with a device for preventing obstacles from entering the machine.
Accurate paper registration is done using two micro adjustable front lays. Cutting chase turn-over device to actualise short set up of repeat jobs. Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen.
3-action movement structure with upper, middle and lower stripping frame facilitates die change. Auxiliary delivery table can realise non-stop delivery. Side delivery guide board drive by air cylinder, front paper guide brush and side air blow system, all strength and degree can be adjusted so that all kinds of paper, no matter running at low or height speed, will be aligned at delivery section.
239 total views, 1 today